|
1. Dual-WAN
* Outbound Policy-Based Load-Balance
* BoD (Bandwidth on Demand)
* WAN Connection Fail-over
2. WAN Protocol
* DHCP Client
* Static IP
* PPPoE
* PPTP
* BPA
* L2TP *
3. Firewall
* CSM (Content Security Management) for IM/P2P Application
* Multi-NAT, DMZ Host, Port-Redirection/Open Port
* Policy-Based IP Packet Filter
* DoS/DDoS Protection
* IP Address Anti-Spoofing
* E-Mail Alert and logging via Syslog
* Bind IP to MAC Address
4. VPN
* Up to 32 VPN Tunnels
* Protocol: PPTP, IPSec, L2TP, L2TP over IPSec
* Encryption: AES, MPPE and Hardware-Based DES/3DES
* Authentication: MD5, SHA-1
* IKE Authentication: Pre-shared Key and Digital Signature (X.509)
* LAN-to-LAN, Teleworker-to-LAN
* DHCP over IPSec
* NAT-Traversal (NAT-T)
* Dead Peer Detection (DPD)
* VPN Pass-Through
5. Bandwidth Management
* Class-based Bandwidth Guarantee by User-Defined Traffic Categories
* DiffServ Code Point Classifying
* 4-level Priority for Each Direction (Inbound/Outbound)
* Bandwidth Borrowed
* Bandwidth/Session Limitation
6. Network Management
* Web-Based User Interface (HTTP/HTTPS)
* Quick Start Wizard
* CLI (Command Line Interface) / Telnet/SSH*
* Administration Access Control
* Configuration Backup/Restore
* Built-in Diagnostic Function
* Firmware Upgrade via TFTP/FTP
* Logging via Syslog
* SNMP Management with MIB-II
7. Content Filter
* URL Keyword Blocking (White list and Block list)
* Java Applet, Cookies, Active X, Compressed / Executable / Multimedia File Blocking
* Web Content Filter (SurfControl)
* Time Schedule Control
8. Network Features
* DHCP Client/Relay/Server
* Dynamic DNS
* NTP Client
* Call Scheduling
* RADIUS Client
* DNS Cache/Proxy
* UPnP
* Prot-Based VLAN
* Configurable WAN2
* Routing Protocol:
o Static Routing
o RIP V2
Technical Specifications of Vigor2910
Hardware Interface LAN Maximum 4-port 10/100 Base-TX Switch
WAN Maximum 2-port 10/100 Base-TX Ethernet
Printer 1-port USB for connecting to USB printer
Dual-WAN Outbound Policy-Based Load-Balance
BoD (Bandwidth on Demand)
WAN Connection Fail-over
WAN Protocol DHCP Client
Static IP
PPPoE
PPTP
BPA
L2TP *
Firewall CSM (Content Security Management) for IM/P2P Application
Multi-NAT, DMZ Host, Port-Redirection/Open Port
Policy-Based IP Packet Filter
DoS/DDoS Protection
IP Address Anti-Spoofing
E-Mail Alert and Logging via Syslog
Bind IP to MAC Address
VPN Up to 32 VPN Tunnels
Protocol PPTP , IPSec , L2TP, L2TP over IPSec
Encryption MPPE
AES
Hardware-Based DES/3DES
DHCP over IPSec
IKE Authentication: Pre-shared Key and Digital Signature (X.509)
NAT-Traversal (NAT-T)
Dead Peer Detection (DPD)
VPN Pass-Through
LAN to LAN
Teleworker to LAN
Bandwidth Management Class-Based Bandwidth Guarantee by User-Defined Traffic Categories
DiffServ Code Point Classifying
4-level Priority for Each Direction (Inbound/Outbound)
Bandwidth Borrowed
Bandwidth/Session Limitation
Network Management Web-Based User Interface (HTTP/HTTPS)
Quick Start Wizard
CLI (Command Line Interface) / Telnet/SSH*
Administration Access Control
Configuration Backup/Restore
Built-in Diagnostic Function
Firmware Upgrade via TFTP/FTP
Logging via Syslog
SNMP Management with MIB-II
Content Filter URL Keyword Blocking (White list and Block list)
Java Applet, Cookies, Active X, Compressed / Executable / Multimedia File Blocking
Web Content Filter (SurfControl)
Time Schedule Control
Network Features DHCP Client/Relay/Server
Dynamic DNS
NTP Client
Call Scheduling
RADIUS Client
DNS Cache/Proxy
UPnP
Prot-Based VLAN
Configurable WAN2
Routing Protocol Static Routing
RIP V2
Max. Power 10 Watt
Dimension L220 * W160 * H36 ( mm )
Power DC 12V ~ 15V
The Vigor2910 series provides a configurable second WAN interface and supports policy-based load-balancing and connection fail-over on dual-WAN interface. Except the QoS function for the original IP layer, it also supports NAT session/bandwidth management which increases the usage efficiency of bandwidth greatly.
Figure 1 . Back Panel
Figure 2 . Dual WAN
Figure 3 . Smart VPN Client
|
